After the operation is completed every day, the machine should be maintained daily, that is, the technical maintenance of the shift, including: removing dust, weeds, oil and other dirt, and performing a comprehensive cleaning of the machine; checking the engine oil level, the inspection steps are: first remove the lubricating oil and add it to the mouth cover, dry the oil ruler; insert the oil ruler into the refueling port again, then pull it out, observe the oil level, and supplement the lubricating oil that meets the requirements if necessary according to the operation manual.Change the oil in strict accordance with the instructions, and always check the condition of the spark plug. When not in use for a long time, clean up the surface stains and store them.

The operating environment for forage harvesting is poor. According to the conditions of the operating plot, the air filter should be cleaned 1-2 times a day to keep the filter clean.The operation method is: first wipe the appearance of the air filter clean, unscrew the air inlet screws, and wipe clean the debris and dust in the air inlet. The filter element of the air filter is installed in the lower part of the filter, and the filter element box is outside. Unscrew the fasteners, remove the filter element, and wipe the external dirt. Then take a small amount of clean diesel, dip the diesel with a brush to clean the filter element, wipe the filter element box clean, add an appropriate amount of oil to the filter element box, and then install the filter element in sequence, install the fasteners, and tighten the screws on it.

Check and maintain the cutter. The cutter is also a vulnerable part. Check the condition of the cutter every day after the operation, unscrew the cutter to see if there is any damage. When the blade is defective, it can be polished with an ordinary whetstone. When the blade is severely damaged, the blade should be replaced.Then reinstall the blade to the cutting disc and tighten the screws.

Careful daily maintenance can ensure that the lawn mower will have fewer failures during operation and improve operating efficiency.